Tools Introduction Class
Tools Feature & Advantage Introduction Class
Tools Operation and Application Class
Tools Maintanence and Repair Class
Tools Quality Checking and Certified Class
Tools Torque Introduction
Marketing Service Area
Screw Extractor Set (Fine thread)
Popularity : 34913Features
Goal: To remove damaged screws.
Basic Principle: The direction of the thread is levorotatory. Screw the extractor into the damaged screw in levorotatory direction, and the damaged screw will be extracted by the rotation.
Operation: Drill a hole on top of the damaged screw initially. Utilize the extractor with a tap wrench. Screw the extractor into the hole in levorotatory direction, then the damaged screw can be removed.
Specifications
-
Material: SCM440
-
Heat Treatment
1. HRC40°~42° (M6、M8)
2. HRC42°~46° (M11、M14)
3. HRC45°~50° (M18) -
Surface Treatment: Polish and black oxide.
| Size | Capacity (Imperial) |
Capacity (Metric) |
|---|---|---|
| M6 | 1/8"～1/4" | 3.25～6.35 |
| M8 | 1/4"～5/16" | 6.35～7.9 |
| M11 | 5/16"～7/16" | 7.9～11.11 |
| M14 | 7/16"～9/16" | 11.11～14.28 |
| M18 | 9/16"～3/4" | 14.28～19.05 |
Operating Steps
| 1 | 2 | 3 |
|---|---|---|
 |
 |
 |
|
Demonstrating with an 8mm screw and M11 screw extractor. |
The situation of damaged screw may be encountered during the screwing process. |
|
| 4 | 5 | 6 |
 |
 |
 |
|
In the beginning, use a spot drill to locate the position of the center. Due to the cross section is crooked and rough, using a regular drill might drill might end up with an off-center hole. |
Follow up with using a regular drill that is under 6mm. If using a drill that is over 6mm on an 8mm screw, the inner wall of the damaged screw might be torn while tapping and lead to the harming of the original thread on the damaged screw. |
Rotate in counterclockwise direction till the damaged screw is fully extracted. |
| 7 | ||
 |
||
|
The damaged screw is removed successfully. |
||
